My 1982 Corvus "5 MB" drive, what's inside?

February 23, 2025 · First shared in the Retro Microcomputers, Workstations, Servers and Consoles - Welcome! Facebook group

My 1982 Corvus “5 MB” drive, what’s inside?
So let me get this straight, it’s 1982, and you want to build a 24 TB storage array with mass quantities 5 MB Corvus drives?

1982 24 TB Corvus Array:
Upfront: $15.56 billion.
Annual power: $446.76 million.
Space: 11.27 acres.

Modern 24 TB Seagate:
Upfront: $500.
Annual power: $5 (1982 rate).
Space: Negligible (~0.0001 ft²).

To arrive at these numbers you have to consider the cost of powering 4,000,000 5 MB Corvus drives at 85 Watts each. Then you need to consider the datacenter space and cooling. These drives were big and power hungry! So next time you look at your modern 24 TB hard drive that fits in the palm of your hand, consider just how far we have come!

P.S. The reason you only need 4 million of these drives and not 4.8 million is because Corvus actually used 6 MB drives in the 5 MB models. You can read about this in the Corvus service manual, and by decoding the serial number in my first post.

The insides of my “5 MB” drive, currently not working due to a problem with the controller board. The “5 MB” Corvus drives…

The insides of my “5 MB” drive, currently not working due to a problem with the controller board. The “5 MB” Corvus drives are actually 6 MB drives internally. You can learn this from the Corvus service manual. The insides of the Corvus Multiplexer are on the left.

This is the controller board in my 5 MB drive. I removed the mirroring board and moved it to my 10 MB drive that is still…

This is the controller board in my 5 MB drive. I removed the mirroring board and moved it to my 10 MB drive that is still working.

This is the rather large 5 MB drive upside down

This is the rather large 5 MB drive upside down

Here you can see the manufacturer was IMI, International Memories Inc, and the drive was Model 5007.

Here you can see the manufacturer was IMI, International Memories Inc, and the drive was Model 5007.

This is another shot of the Z80 based controller board in the 5 MB drive.

This is another shot of the Z80 based controller board in the 5 MB drive.

This is the inside of my 10 MB drive that now has the mirroring board installed.

This is the inside of my 10 MB drive that now has the mirroring board installed.

View of the mirroring board that allows backups to video tape using NTSC RCA connectors on the back of the drive.

View of the mirroring board that allows backups to video tape using NTSC RCA connectors on the back of the drive.

Another big and power hungry IMI drive.

Another big and power hungry IMI drive.

Tags: corvus, history, hardware