Happy Sunday.

September 28, 2025 · First shared in the Apple II Enthusiasts Facebook group

Happy Sunday. Back to debugging the bad 🐈. The PS/2 keyboard adapter gives me an easy place to grab power for my logic probe on my “base pan ][+”. Access to pins 11 and 12 should be a lot easier without a case in my way 🙌

https://www.facebook.com/share/p/173xo3dJtq/?mibextid=wwXIfr

Now I have a nice spot to power my logic probe

Now I have a nice spot to power my logic probe

Pin 12 is normally high, but should go low when accessing $C0A0-$C0AF with my cat in slot 2

Pin 12 is normally high, but should go low when accessing $C0A0-$C0AF with my cat in slot 2

$C0AD for slot 2 ($C08D + $20)

With the bank switch jumper removed, I’ve got the mini assembler in ROM 🙌

$F666G starts the mini assembler, reading $C0AD in a tight loop makes it easy to see if Chip Enable is going low

SWBYT is connected to the 138432

Add $20 for slot 2

Hmmm, both Novation chips are seeing CE go low correctly, now I need to see what’s happening at pin 19 of the bus transceiver

Pin 19 is behaving correctly on the LS245, next I test if R/W goes low across all three chips

138431 an 138400 removed

Now I can read the status of SWBYT correctly and as I change the dip switches, the status byte updates accordingly 🙌

Looks like maybe I have a bad 138431?

Tags: hardware, software